注塑机周边配套设备制造商
全国咨询热线:
资讯详情

德升科技——油式模温机

发表时间:2022-05-12 11:13

油式模温机

Oil mold temperature controller


微信图片_20220508111242.png


特点 Features

1.使用温度为200℃。

2.高流量,高压力设计,减少温差。

3.本机配备的PID智能型自动演算的温度控制器,能准确显示和控制模具温差于所需温度±1℃内。

4.两段式加热结构设计,可视所需之温度增减电力,并配合特殊之发热构造,可省时省电。

1. The operating temperature is 200°C.

2. High flow, high pressure design, reduce temperature difference.

3. This machine is equipped with PID intelligent automatic calculation temperature controller, which can accurately display and control the mold temperature difference within ±1℃ of the required temperature.

4. The two-stage heating structure design can increase or decrease the electric power according to the required temperature, and cooperate with the special heating structure, which can save time and electricity.



安全保护系统

1.发热圈过载保护

2.泵蒲过载保护及指示灯

3.溢油保护和预留接

4.碟阀式设计,操作和保养

5.泵蒲反转保护及指示灯

6.电源缺相和逆相保护及指示灯

7.缺媒介蜂鸣器警报保护及指示灯

8.内置高温保护及温控器

9.自动回油装置和预留接口,换模时干净和不浪费

10.防爆式油路设计,操作和保养


safety protection system

1. Overload protection of heating coil

2. Pump overload protection and indicator light

3. Oil spill protection and reserved connections

4. Butterfly valve design, operation and maintenance

5. Pump reverse protection and indicator light

6. Power phase loss and reverse phase protection and indicator lights

7. Lack of media buzzer alarm protection and indicator light

8. Built-in high temperature protection and thermostat

9. Automatic oil return device and reserved interface, clean and no waste when changing molds

10. Design, operation and maintenance of explosion-proof oil circuit

微信图片_20220508111048.png


资讯列表
咨询热线: 联系邮箱:desheng246@163.com 联系电话:0769-82996089 联系地址:广东省东莞市塘厦镇横塘旺角路16号1栋101室
139 2920 5826
东莞市德升自动化科技有限公司